4.1003 Medium Industrial ("J") District

  1. Purpose and Intent
    The purpose of the Medium Industrial (“J”) District is to provide for a range of moderate-intensity industrial uses provided they are not noxious or offensive due to odors, smoke, dust, noise, fumes or vibrations. This district is intended to serve the entire community.
  2. Uses
    In the Medium Industrial (“J”) District, no building or land shall be used and no building shall be hereafter erected, reconstructed, altered or enlarged, nor shall a Certificate of Occupancy be issued, except in accordance with the use tables in Chapter 4, Articles 6 and 8 and the supplemental use standards of Chapter 5.
  3. Property Development Standards
    The minimum dimension of lots and yards and the height of buildings in the Medium Industrial (“J”) District, shall be as shown in the accompanying table.

    Medium  Industrial (“J”) District

    Front Yard*

    None required if entire block frontage is zoned “FR” through “K”; if the block frontage contains a residential district or the “ER” or “E” District, the most restrictive district standards apply.

    Rear Yard*

    10 feet minimum adjacent to residentially zoned lot, none otherwise

    Side Yard*


    Interior lot 5 feet minimum adjacent to residentially zoned lot, none otherwise.  If provided, side yard must be 3 feet minimum
    Corner lot** None required unless through lot, then 10 feet minimum required

    Height

    12 stories or 120 feet maximum

    Notes:

    * Additional setback may be required by Sections 6.101C or 6.300.

    **May be subject to projected front yard (Section 6.101F)

  4. Other Development Standards
    Development in the Medium Industrial (“J”) District may be subject to a variety of general development standards, including, but not limited to:
    1. Off-Street Parking and Loading. Industrial buildings require one space per 500 square feet of gross floor area or one space per three employees, whichever is greater. Warehouse buildings require one space per four employees, with a four-space minimum.  For further details, other uses, and loading areas, see 6 ‘Development Standards’, Article 2. 
    2. Landscaping and Buffers. For industrial uses, generally, four percent of net site area, or a landscape area of 30-foot depth along all public rights-of-way.  See 6 ‘Development Standards’, Article 3. 
    3. Signs. See 6 ‘Development Standards’, Article 4 for the requirements.